Note: Your camera must be set to for this setting to work. If your camera is in Manual (M) mode with a set shutter speed, this timer determines how long the camera shutter button stays held down. Range: 0 seconds to 99 hours, 59 minutes, 59 seconds. INTVL (Interval Timer) Sets the time between consecutive shots.
You can program any number from 1 to 399, or set it to "--" which represents infinity. Selecting infinity means the camera will keep shooting until you press STOP or your battery dies. 5. WTR-2 Exclusive: BEEP (Audio Alert) aodelan wtr2 user manual
2 × AAA batteries are required for the transmitter and another 2 × AAA batteries for the receiver – these are not included and must be purchased separately. Note: Your camera must be set to for this setting to work
Change your camera's shooting mode dial to (Bulb) or manual mode scrolled down to "BULB". The remote skips frames in interval mode. The interval is too short. INTVL (Interval Timer) Sets the time between consecutive
The Bracketing (BKLN) function automates the capture of multiple exposures at different durations, which can then be combined in post‑processing to create high‑dynamic‑range (HDR) images. This is especially useful for low‑light scenes where light levels vary dramatically.
The transmitter and receiver are normally pre‑paired at the factory, so no action is needed for first‑time use. However, if the receiver’s LED does not change to red and the camera does not respond when you press the shutter button, follow these steps:
As you become more comfortable with the Aodelan WTR2, you may wish to explore its more advanced features. These include: