Provides TS EN 60352-2, which adheres to the same European requirements.
“Transient fault,” muttered the electronics technician, Kai. “Ground loop? Cold solder joint?”
Avoid free PDFs from random websites. Many are outdated (e.g., 2006 edition vs. 2024 edition), missing critical annexes, or contain corrupted tables. A wrong crimp height spec can literally cause the failure in the story. din en 60352-2 pdf
To achieve compliance with DIN EN 60352-2, a crimped connection must meet strict physical, electrical, and geometric criteria. 1. Mechanical Strength (Pull-Out Force)
The DIN EN 60352-2 standard is part of a larger family of standards governing various solderless connection technologies. Provides TS EN 60352-2, which adheres to the
Using components from mixed manufacturers or unmatched hand tools transfers all quality and failure liability to the assembly shop floor. For automated processing, integrating certified tools featuring automatic cycle-ratcheting ensures consistent pressure application, keeping production yields stable and fully compliant. Purchasing and Accessing Official Standards
The DIN Media Standard Registry classifies DIN EN 60352-2 (harmonized globally with ) as the primary authority on gas-tight, solderless mechanical connections. Crimping functions as a controlled deformation technique. It compresses a barrel contact around a conductor until the components form a homogeneous, cold-welded mass. This structural transformation effectively replaces traditional soldering, eliminating common errors like cold solder joints and thermal damage to nearby insulation. Cold solder joint
The DIN EN 60352-2 standard is a widely recognized specification in the electronics industry that outlines the requirements for solderless connections. The standard is part of a series of documents that provide guidelines for the design, testing, and application of solderless connections in various electronic devices. In this article, we will explore the key aspects of DIN EN 60352-2 and provide insights into its significance, scope, and application.
The reliability of a crimped connection depends entirely on the correct selection of terminals, wires, and tooling. The standard ensures that when the rules are followed, a proper crimp creates a connection that is:
Because DIN EN 60352-2 is a copyrighted intellectual document, it is not legally available for free download on public forums. To ensure you have the most up-to-date and legally compliant version (including any recent amendments or corrigendums), you should acquire it through official standards portals:
Pull force. A 0.5 mm² wire must withstand at least 135 N of pull without detaching. Voltage drop under 5 mV per ampere. Salt spray. Thermal cycling.