Lin stopped laughing.
Wish me luck.
: Optical sensors in the receiver detect how much IR radiation is absorbed by gas clouds on the path. Signal Output drager pulsar 7000 manual
You can find these documents by:
Utilize the built-in rifle sight or the optional alignment telescope mounted on the device. Adjust the pan-and-tilt mechanism until the opposite unit is centered in the crosshairs. Tighten the mounting bolts loosely to hold the position. Step 2: Electronic Alignment using a Handheld Terminal Lin stopped laughing
The manual explains how the system operates, including the meaning of the on both the transmitter and receiver. These LEDs provide at-a-glance information about the device’s status, including measuring mode, alignment mode, warning signals, and errors.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Signal Output You can find these documents by:
Ensure the internal earth terminal is connected to the local safety ground, and the cable shield is grounded at the controller end only to avoid ground loops. 4. Optical Alignment and Commissioning
This section of the manual provides step-by-step instructions for physically installing the Pulsar 7000's transmitter (Tx) and receiver (Rx), as well as connecting the junction box for power and signal output. The manual specifies requirements for cabling, conduit fittings, and mounting surfaces.