• Incubation bath heater failure• Faulty thermistor sensor• Fluid circuit blockage 1. Measure resistance across the heater element (

Check continuity between the probe arm and the main chassis ground.

Perform full preventative maintenance as outlined in the service manual.

Execute a "Wash Cycle" using an alkaline detergent followed by a system blank verification. Error: "Sample/Reagent Arm Motor Jam"

The is an essential technical guide designed for authorized service engineers to maintain the efficiency and accuracy of this fully automated biochemistry analyzer. Organized in a progressive sequence, the manual provides a deep dive into the instrument’s hardware, hydraulic systems, and diagnostic software to ensure reliable clinical performance. Core Components of the Service Manual

Disclaimer: This content is for informational purposes only. Always follow manufacturer guidelines and safety protocols when servicing medical devices.

Perform a "Home All Axis" command to ensure the new coordinates index accurately without hitting the edges of the wash well.

Quartz halogen lamp (12V, 20W) with an integrated cooling fan.

The internal compressor loop must maintain steady pressure. Adjust the mechanical relief valve until the system pressure gauge reads within the factory-specified bar range.

Clean the mixer and probe with recommended solutions to prevent cross-contamination.