Hager Controls Bp 10140 Manual __top__ -

: The load itself is connected to terminal 2, ensuring the circuit passes through the timer's relay.

If you want this rule to apply to the whole week, select the full block (1-7) and press .

Hager does not always keep very old product manuals on their main site, but try these sources: hager controls bp 10140 manual

: Input the hours and minutes using the navigation buttons and confirm each with ok . Resources & Downloads

To ensure safe and efficient operation, it's essential to familiarize yourself with the technical specifications of the Hager Controls BP 10140. Some of the key technical specifications include: : The load itself is connected to terminal

Tip from the Manual: Always ensure the mounting surface is clean and dry if using adhesive. Furthermore, the manual often advises against installing the device near large metal objects or reinforced concrete walls that might shield the radio signal.

Verify that the "Power" LED on the device is lit, indicating bus connectivity. C. Mounting Snap the device onto the DIN rail. Resources & Downloads To ensure safe and efficient

| Parameter | Typical Value | |-----------|----------------| | Rated Voltage | 100-240V AC/DC | | Rated Current | 10A – 40A | | Power Loss | < 2W | | Operating Temp | -25°C to +55°C | | Protection Class | IP20 | | Terminal Capacity | 0.5 – 6 mm² |

: A high-contrast backlit LCD screen showing real-time scheduling status, channel outputs, and programmatic parameters.

Verify that the load is wired to Terminal 5 (Normally Open) instead of Terminal 4 (Normally Closed). Incorrect internal clock or DST setting.