Hanmatek Dos1102 Manual

Always connect the probe ground clip to a grounded circuit point; never connect it to a high-voltage source.

Measures the horizontal difference between two vertical bars. 5.3 Waveform Storage and Math

The DOS1102 offers automated measurement tracking alongside manual cursor readings. Automated Measurements Press the function key. hanmatek dos1102 manual

: Verify the power outlet works and check the fuse located right next to the AC power input jack.

Use so that the waveform fills roughly 4 to 6 vertical divisions on the grid. Always connect the probe ground clip to a

Adjust the trimmer capacitor in the opposite direction until the spike disappears. Making Core Measurements Using the Autoset Feature

Here is a comprehensive guide to understanding and using the , based on its official manual and community insights. Getting Started with the Hanmatek DOS1102 Go to product viewer dialog for this item. Automated Measurements Press the function key

Automatically adjusts vertical/horizontal scales to display a stable waveform. Measure: Opens automatic measurement menus. Cursor: Enables cursors for manual measurements. Storage: Saves/recalls waveforms or settings. 4. Basic Operation Guide 4.1 Vertical System Settings

Adjusts the vertical scale of the selected channel. Turn clockwise to zoom in (smaller voltage per grid division) and counter-clockwise to zoom out. POSITION Knob: Moves the waveform up or down on the screen.

Adjust the Trigger Level knob. Check that the Trigger Source is set to the active channel.