: In most Proteus 8 installations, navigate to: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY .
Proteus 8 can be used to simulate IR2110-driven circuits, but accurate results require obtaining a proper SPICE subcircuit or creating a detailed behavioral model, carefully modeling bootstrap and parasitic elements, and validating against datasheet and/or another SPICE tool.
Have you successfully installed the IR2110 library? Share your experience in the comments below (if applicable). If the download link is broken, email us for an updated mirror. ir2110 library for proteus 8 link
IR2110_Library.LIB (Contains the electrical simulation models)
If any pin is missing or mislabeled, you have a corrupted library. Use the alternative manual method (described at the end). : In most Proteus 8 installations, navigate to:
| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | No libraries found | Library path missing or corrupted | Use to reconfirm the LIBRARY folder location. | | Unknown subcircuit type "IR2110" | The model file (.MODEL or .SUBCKT) is missing or not linked to the component | Ensure both the .LIB and the .MODEL file are placed in the correct folders. | | Too few parameters for subcircuit type | The SPICE model expects parameters that were not passed | Manually edit the component properties and add the required parameters (e.g., temperature coefficients). | | Component not found after installation | Proteus was not restarted | Close Proteus completely and relaunch it. |
Combine two IR2110s to drive four MOSFETs in an H-bridge. Great for pure sine wave output (use SPWM modulation). Share your experience in the comments below (if applicable)
How to Download and Install the IR2110 Library for Proteus 8
Simulating the H‑bridge in Proteus allows you to observe shoot‑through currents, MOSFET switching losses, and bootstrap capacitor recharging behaviour before building the hardware.