Ivoclar Programat P100 Manual English Fixed Online

Connect the vacuum hose to the rear port. Plug the pump into the dedicated socket on the furnace so the P100 can control the vacuum cycles automatically.

Available in 110–120V and 200–240V configurations. ivoclar programat p100 manual english

: When the furnace is off, keep the furnace head closed to prevent humidity from entering the firing chamber. 📑 Manual & Technical Resources Connect the vacuum hose to the rear port

Proper temperature calibration is essential for consistent ceramic results. : When the furnace is off, keep the

Avoid touching the thermocouple or quartz tube with bare skin, as oils can cause premature damage. How to calibrate Programat P100 | Dental Lab Network

: Open the furnace head, place your object on the firing tray, and position it on the firing table. : Press the

Users can define and store personalized firing programs, including pre-heating, heating rate, holding temperature, vacuum level, and cooling steps. Adjusting Parameters Use the keypad to enter the firing menu (P). Navigate to the desired program number.