Lighthouse-tx-htc-2-0-calibration-rescue-244.bin 〈HD〉

: The calibration rescue binary temporarily forces the hardware to bypass certain diagnostic halts, recalibrates its internal tracking arrays, and reverts the device back to a baseline operating mode (version 244). Where to Find the File Safely

Unplug the USB cable, power-cycle your device, and launch SteamVR to test tracking stability. Preventive Measures: Protecting Your Tracking Data

Analysis of lighthouse-tx-htc-2-0-calibration-rescue-244.bin (by community members on GitHub) reveals:

The base station should begin to spin and the light should flash rapidly (usually , sometimes red temporarily). This indicates it is calibrating. Wait at least 2–5 minutes. lighthouse-tx-htc-2-0-calibration-rescue-244.bin

While continuing to hold the button, plug the power adapter back into the device. Keep holding the button for 5 seconds, then release it.

Hold down the channel button on the back of the base station, then plug in the power cord. Wait a few seconds until your PC detects a removable storage drive; only then can you release the button. The drive will appear as "CRP_DISABLED".

If the rescue firmware successfully flashes but the light stays red, your base station likely has a physical component failure. Listen closely to the unit—if you do not hear the faint high-pitched whine of the internal motor spinning up, the motor is dead, and the unit must be replaced or sent to HTC for repair. : The calibration rescue binary temporarily forces the

C:\Program Files (x86)\Steam\steamapps\common\SteamVR\tools\lighthouse\firmware\lighthouse_tx\archive\htc_2.0 Use code with caution.

It is typically used in conjunction with a second file called lighthouse_tx_htc_2_0-244-2016-03-12.bin as part of a two-step process: first to salvage the bricked station, and then to fully restore it to a working state.

If the EEPROM chip itself has suffered electrical degradation, it will no longer retain flashed data. In this scenario, the unit must be sent to an authorized repair center for component-level replacement. This indicates it is calibrating

This article explains what this rescue file does, why base station and tracker calibration data gets corrupted, and how to use this binary to restore your SteamVR tracking system. Understanding SteamVR Lighthouse 2.0 Calibration

HTC Vive and Valve Index tracking relies on SteamVR Lighthouse 2.0 base stations. During normal operation, these devices require occasional firmware updates delivered through SteamVR.