Simco Fmx002 Manual =link= Full -

Do not skip this step. The manual warns that zeroing should be performed after a battery change or temperature shift.

Do you need the wiring pinout for the ?

If you are measuring in a tight enclosure, press the button while the LED beams are aligned. Withdraw the meter to read the frozen measurement safely. Press HOLD again to release it. 5. Maintenance, Battery Replacement, and Calibration Cleaning the Sensor simco fmx002 manual full

Note: The operator can also ground the device by holding the conductive plastic case while standing on a grounded ESD floor mat. Step 2: Powering On and Zeroing Move away from any highly charged objects or static fields.

The FMX-002 uses two integrated LED guide lights to ensure the correct measuring distance. Do not skip this step

Press the MEM button again to enter the memory recall mode.

To lock a reading while measuring in tight spaces, press the button before pulling the meter away from the target. 4. Maintenance and Care If you are measuring in a tight enclosure,

The is a non-contact, handheld electrostatic field meter designed for measuring surface electrostatic charges and verifying the performance of ionization equipment. Once an industry standard for quality control in electronics manufacturing, this compact, pocket-sized device allows operators to accurately measure both positive and negative polarity charges up to ±20 kV at a precise distance of 25 mm (1 inch).

Clean the outer conductive plastic casing with a soft cloth dampened with water or a mild antistatic cleaner. Do not use alcohol, acetone, or chemical solvents.