Document the common audio signals (e.g., 1 beep for "off charge," long tone for "obstruction detected").
Slide the internal splice bars into the rail channels. Tighten the joint bolts securely using an Allen wrench to ensure a seamless seam. Any bump at the rail joint will cause premature wear on the drive rollers.
Mount the copper charging contact strips at the absolute top and bottom limits of the rail.
Test that the unit charges correctly at both parking positions. 4. Final Adjustments and Safety Checklist Final Inspection: Check all screws and bolts for tightness. thyssenkrupp levant stair lift installation manual full
Before any tools are unpacked, the certified technician will thoroughly inspect the installation site. This involves verifying the staircase's dimensions, ensuring the landing areas at the top and bottom of the stairs are adequate, and checking that the electrical outlet is positioned correctly and safely. They will also refer to specific installation drawings provided with the stairlift kit.
Unscrew and temporarily remove the mechanical end-stop block from the top of the rail.
The motorized drive unit containing the motor, circuit board, and batteries. Document the common audio signals (e
Ensure a full survey of the staircase is conducted to measure the exact length needed and check for obstacles.
While the full installation manual is restricted, the is readily available and is a critical document for the stairlift's owner. It contains all the necessary information for the correct and safe use of the stairlift.
Thyssenkrupp Levant Stair Lift Installation Manual: A Full Guide to Safe Setup Any bump at the rail joint will cause
Drive the lift to the bottom landing. It should stop smoothly before hitting the physical mechanical end stop. Maintenance and Troubleshooting Routine Maintenance Checklist
Connect the rail sections on the floor, ensuring a smooth, straight connection.