Unraid Reset Network Settings Install ((new)) 〈2025-2027〉
Do you have to the server with a monitor and keyboard?
Switch the assignment from DHCP to Static. Choose an IP outside your router's dynamic DHCP pool to prevent IP address conflicts with other devices.
Note: Deleting these files will not harm your Docker containers, VMs, arrays, or data shares. Unraid automatically generates fresh, default versions of these files upon the next boot. Step 4: Reinsert the USB and Boot Unraid
If you cannot access the Unraid WebGUI or connect via SSH, you must physically access the Unraid USB boot flash drive to clear the network configuration. Step 1: Power Down Safely unraid reset network settings install
If you have a monitor and keyboard physically connected to your server, you can perform the reset without moving the USB drive.
: Find and delete (or move to a backup folder) the following files: network.cfg (contains IP and DNS settings) network-rules.cfg (stores MAC address to interface mapping) Reboot and Reconnect
Network lockouts usually happen after making changes in the Unraid Settings > Network Settings page. Common triggers include: Do you have to the server with a monitor and keyboard
: Shut down the server, plug the USB drive into another computer, and delete the files from the /config directory .
Log into your home router's web interface, navigate to the "Connected Devices" or "DHCP Client List," and look for a device named Tower (or your custom server name).
Log into your home router's admin panel and look for a device named Tower (or your custom server name) to find its newly assigned IP. Note: Deleting these files will not harm your
nano /boot/config/network-rules.cfg
: Locate network.cfg and network-rules.cfg .
Do you have to the server with a monitor and keyboard?
Switch the assignment from DHCP to Static. Choose an IP outside your router's dynamic DHCP pool to prevent IP address conflicts with other devices.
Note: Deleting these files will not harm your Docker containers, VMs, arrays, or data shares. Unraid automatically generates fresh, default versions of these files upon the next boot. Step 4: Reinsert the USB and Boot Unraid
If you cannot access the Unraid WebGUI or connect via SSH, you must physically access the Unraid USB boot flash drive to clear the network configuration. Step 1: Power Down Safely
If you have a monitor and keyboard physically connected to your server, you can perform the reset without moving the USB drive.
: Find and delete (or move to a backup folder) the following files: network.cfg (contains IP and DNS settings) network-rules.cfg (stores MAC address to interface mapping) Reboot and Reconnect
Network lockouts usually happen after making changes in the Unraid Settings > Network Settings page. Common triggers include:
: Shut down the server, plug the USB drive into another computer, and delete the files from the /config directory .
Log into your home router's web interface, navigate to the "Connected Devices" or "DHCP Client List," and look for a device named Tower (or your custom server name).
Log into your home router's admin panel and look for a device named Tower (or your custom server name) to find its newly assigned IP.
nano /boot/config/network-rules.cfg
: Locate network.cfg and network-rules.cfg .
