Wella Climazon Millenium Manual Install !!top!!

"Heads up," she whispered to the empty room, tipping the base onto its back wheels. She aligned the mounting bracket on the bottom of the vertical column with the slot on the base. Click. She tightened the locking screws with a wrench, ensuring the column stood rigid.

Located at the base of the control panel for powering the unit on/off.

Bring the head unit to the front end of the articulated arm. Fit the swivel joint pin into the arm connector tip. wella climazon millenium manual install

Measure and mark the mounting plate position on the wall, ideally 1.8 to 2.0 meters from the floor.

She held down the 'P' button for three seconds to enter the service menu. She needed to set the timer defaults and the temperature units (Celsius, as per the salon standard). She scrolled through the options, selecting the 'Combination' mode—simultaneous infrared and warm air. "Heads up," she whispered to the empty room,

Use the brake screws on the arm to adjust the swivel resistance and the internal tension screw to balance the vertical movement based on the head's weight. 4. Technical Maintenance and Resources

Maintain at least 20 cm of free space around the heating elements for proper ventilation. She tightened the locking screws with a wrench,

Snugly snap on all decorative plastic covers over the wall bracket and arm joints. 4. Step-by-Step Installation: Pedestal/Mobile Version Step 1: Assemble the Base Turn the star base upside down.

Once physically installed, perform these verification checks: