Zoje A6000-g 02 Manual Link Info

Fill the reservoir with high-quality white spindle oil (Industrial Sewing Machine Oil ISO VG 18 or 22).

Pass the thread downward through the lower wire guides on the machine head and needle bar.

Needle is backward; thread path is incorrect; tension is too tight. zoje a6000-g 02 manual

Before operating or servicing the machine, review these fundamental safety rules:

Regularly check the oil gauge. If the oil level drops below the "Low" mark, refill it immediately. Fill the reservoir with high-quality white spindle oil

: Turn the small screw on the bobbin case clockwise to increase tension, or counter-clockwise to reduce drag on the bobbin thread. Stitch Length Regulation

Click.

The power supply is unstable. Turn off the machine, wait for 2 minutes, and plug it into a regulated surge protector.

To insert the bobbin into the shuttle case, place it so the thread pulls counter-clockwise. Pull the thread through the tension slot of the bobbin case until it rests under the tension spring. 4. Smart Control Panel Operation Zoje A6000-G 02 Before operating or servicing the machine, review these

Generally caused by an incorrectly installed needle (wrong orientation or not pushed up far enough) or a bent needle.

Proper threading prevents skipped stitches and thread breakage. Follow this sequence: