Deckma Omd11 Manual 2021 -

is a specialized bilge alarm monitor designed to measure oil-in-water concentrations, ensuring maritime vessels comply with International Maritime Organization (IMO) regulations

Route the outlet pipe to an open funnel or back to the bilge holding tank.

is available, covering installation, wiring, and technical specifications. Operational Guide (Yumpu): An interactive Instruction Manual deckma omd11 manual

The OMD-11 uses advanced optical sensors to measure light scattering. It detects oil particles down to parts-per-million (ppm) levels. Specification Details 0 to 30 ppm (Adjustable up to 50 ppm) Accuracy Meets IMO Resolution MEPC.60(33) Linearity Better than ± 2 ppm Response Time Less than 5 seconds Power Supply 24V AC/DC, 115V AC, or 230V AC Output Signal 0–20 mA or 4–20 mA Alarm Relays 2 independent potential-free relays ⚙️ System Components and Operation The system consists of two primary units working in tandem. The Electronic Unit Houses the microprocessors. Displays the current ppm value on a digital screen. Controls the alarm relay thresholds. Records historical log data. The Measuring Cell Contains the optical glass tube. Houses the infrared transmitter and receiver. Directs the sample water stream. Must be kept clean to avoid false alarms. 🚀 Installation Guidelines

The OMD-11 features a 2-digit, 14-segment LED display that shows the current oil content in ppm. is a specialized bilge alarm monitor designed to

Includes 2 works-adjusted alarms and a potential-free output for driving recorders or external meters. Maintenance:

I can provide specific troubleshooting steps or wiring schematics to fix the issue. Share public link It detects oil particles down to parts-per-million (ppm)

Keeping a physical or digital copy of the on board is a requirement for many Port State Control (PSC) inspections. Inspectors often ask the Chief Engineer to demonstrate the alarm functionality and verify the unit's last calibration date against the manual's log.

A 3-way cock connects the OMD-11 to the separator’s clean water outlet for cleaning and calibration. Piping Material: Use OD copper or stainless steel pipe.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

I can help with: Troubleshooting a specific error code Locating the section for zero-point calibration Identifying the correct spare parts for the wiper system Let me know what you need to fix or set up! Share public link